How do I connect my HP 2630 printer to Wi-Fi

One of the best features of your HP 2630 Printer is that it allows you to connect the device to your Wi-Fi network to get wireless printing. One way to connect the printer is to call the HP Printer customer care number and find out how to use the HP Smart app. Additionally, you can also connect the printer using the WPS option on your router. This blog will give you an overview of how to connect the HP 2630 printer to Wi-Fi using Wi-Fi Protected Setup.

Steps to Connect HP 2630 printer to Wi-Fi

The best and most efficient way to connect your HP Printer to your Wi-Fi network is to use the Wi-Fi Protected Setup (WPS) option. You can refer to the instructions give below to connect your printer using WPS:

  • Step 1: Look for the WPS button on your router, but do not press.
  • Step 2: Turn on the printer and press ‘Cancel’ on the control panel.
  • Step 3: Press and hold the Wireless button on the HP printer control panel
  • Step 4: Make sure you press the button until the wireless light starts to flash.
  • Step 5: Go to the router and press and hold the WPS button for 5 seconds.
  • Step 6: Wait until you see that the router shows that the WPS connection process has started.
  • Keep in mind that, once the wireless button is pressed, your HP printer will stop searching for a WPS connection after two minutes. In case the printer cannot establish the connection you will have to attempt these steps again. After your HP Printer successfully connects to the wireless network you will see that the blue Wireless light on the HP 2630 Printer control panel turns on solid. If the light does not turn solid you can call the HP Printer customer service number and ask for help. Experienced printer technicians are available 24 hours a day to help you troubleshoot any error connected to your HP Printer.